Survey control points are fixed, measured reference marks that give every measurement on a project a common position, and benchmarks are reference marks with a known height. Together they make sure that the survey, the design and the construction all refer to the same positions and levels. Without them, work done by different teams or at different times may not line up. This guide explains what control points and benchmarks are, how they are used and cared for, and where Sail Survey Global, a land surveying company in Dubai, fits among surveying companies in Dubai.
A control point is a marked position on or near a site whose coordinates have been measured with care. It might be a nail in a kerb, a mark on a concrete pad or a pin set in the ground. Surveyors set up their instruments on these points, or measure from them, so every new measurement is tied back to the same reference. Control is usually set up as a network of several points, so that they can be checked against each other.
A benchmark is a stable, marked point with a known height. Levels on the site are measured from benchmarks, so that the height of a floor, a road or a drain is stated against the same reference. Benchmarks should sit on something that will not move, such as a solid structure, and away from traffic and construction work.
Control points have coordinates in a defined coordinate system, and benchmarks have heights from a defined level datum. These must be stated on the survey drawings and agreed by everyone who uses them. If the survey team, the designer and the contractor use different systems, the data may not match. This article does not name specific systems, because the right one depends on the project and the authority involved. Confirm it in the project documents before work starts.
When any of these appear, stop and check the control before continuing. Building on a wrong reference creates errors that are expensive to fix later.
| Stage | Role of control |
|---|---|
| Site survey | Ties the survey to a common reference |
| Design | Allows design drawings to sit on the survey correctly |
| Setting out | Source of positions and levels marked on the ground |
| Construction checks | Reference for checking built work |
| As-built survey | Ties final records to the same reference |
Sail Survey Global, registered as Sail Real Estate Survey Services, is a land surveying company based in Dubai. When you brief any provider, including Sail Survey Global, ask which control the survey will use, how it will be marked and protected, and which coordinate system and datum will be stated on the drawings.
Marked reference positions with measured coordinates, used as the common base for all measurements on a site.
A stable marked point with a known height, used as the reference for levels.
Marks can be moved or damaged, and a check confirms they can still be trusted.
The survey company and the project team, so the information is not lost if people change.